18
k
TEST OUT connector (BNC-type)
To output the analog signal.
This also supplies the VBS signal, an HD signal nearly equal
to the signal output from the VF connector, an HD-SYNC
signal, or an SD-SYNC signal depending on which of these
you have selected on the menu.
For details on the output signals, see “Setting the Camera
Outputs” (page 31).
l
SDI-MONI (serial digital interface) connector (BNC-
type)
For HD-SDI or SD-SDI signal output.
For details on the output signals, see “Setting the Camera
Outputs” (page 31).
m
AUDIO IN CH1 and CH2 connectors (XLR 3-pin) and
switches
Connect audio signals. An input select switch and microphone
power switch are provided for each channel.
CH1 audio input select switch
Set to the appropriate position according to the equipment
connected to the AUDIO IN CH1 connector.
LINE:
When a line-level (0 dBu) signal source is connected
FRONT MIC:
When using the microphone connected to the
MIC 1 IN connector
MIC:
When an external microphone is connected
CH2 audio input select switch
Set to the appropriate position according to the equipment
connected to the AUDIO IN CH2 connector.
LINE:
When a line-level (0 dBu) signal source is connected
AES/EBU:
When a digital audio signal is connected (The
signal must be in synchronization with the camera
output). With HDC2550, the signal will not be transmitted
to CCU.
MIC:
When an external microphone is connected
Microphone power switches
When a microphone is connected to the corresponding AUDIO
IN connector, set whether or not to supply a power to the
microphone.
+48V:
To supply a power of +48 V
OFF:
Not to supply a power
(No function has been assigned to the lowermost position. No
power is supplied to the microphone.)
Note
To 12 V power, contact a Sony sales representative
or Sony service representative.
CH 1
48V
OFF
MIC
LINE
48V
OFF
MIC
LINE
AES/EBU
FRONT MIC
AUDIO IN
CH 2
CH2 audio input select switch
CH1 audio input select switch
Microphone power switches
AUDIO IN CH1 connector
AUDIO IN CH2 connector
