![background image](http://html.mh-extra.com/html/sony/hdc-3300r/hdc-3300r_operation-manual_400103018.webp)
18
Preparations
4
Adjust the front-rear position so that the camera
handle does not interfere when you rotate the BKW-
401 arm upwards.
Attaching the Cable Clamp Belt
(Supplied)
You can secure the camera cable to the camera by attaching
the supplied cable clamp belt.
1
Insert the belt bracket into hole
A
or
B
of the cable
clamp belt.
2
Remove two +B3
×
5 screws and a blind screw shown
in the figure below from the camera.
3
Secure the cable clamp belt to the camera, using the
two suB3
×
8 screws.
4
1
Release the buckle,
2
bundle the cable with the
belt,
3
then lock the buckle again.
5
Adjust the length by pulling down the end of the belt.
Not to interfere
A
B
Belt bracket
Blind screw
+B3
×
5 screws
+B3
×
8 screws
1
2
3
Camera cable