17
Preparations
1
Loosen the viewfinder left-right positioning ring.
2
Slide the viewfinder left or right to move it into a good
viewing position.
3
Tighten the viewfinder left-right positioning ring.
To adjust the position forward or backward
1
Loosen the viewfinder front-rear positioning lever and
LOCK knob.
2
Slide the viewfinder towards the front or rear of the
camera to move it into a good viewing position.
3
Tighten the viewfinder front-rear positioning lever and
LOCK knob.
Detaching the viewfinder
Loosen the viewfinder left-right positioning ring, pull the
viewfinder stopper, then pull out the viewfinder by sliding
it in the direction opposite to that when attached.
Keeping the viewfinder from hitting your
leg (using BKW-401)
To keep the viewfinder from bumping your leg when
carrying the camera, install the BKW-401 Viewfinder
Rotation Bracket (optional) and rotate the viewfinder
upwards.
Lock the viewfinder in a slightly forward position before
rotating it upwards. If the viewfinder is in its rearmost
position, the arm of the viewfinder rotation bracket will
strike the grip.
Attaching procedure of the BKW-401
1
Turn the arm of the rotation mechanism assembly of
the BKW-401 in the direction of the arrow in the
following illustration.
Next, using a hexagonal wrench 3 mm across flats,
remove the bolts (M4
×
8) together with the washers,
to separate the rotation mechanism assembly from the
viewfinder front-back positioning mechanism
assembly.
2
In the same manner as step
1
, remove the viewfinder
shoe of the camera from the front-rear positioning
mechanism.
3
Using the two bolts (M4
×
8) and the washers removed
from the camera in step
2
, attach the rotation
mechanism assembly of the BKW-401 to the camera.
Viewfinder front-rear
positioning lever
LOCK knob
Note
Hexagon
socket bolts
(M4
×
8)
