40
Overview
DC (HDCU1500) power supply is activated. The power is
not supplied unless a camera is connected via an
optoelectric cable.
Also, the HDCU1000/HDCU1500 is equipped with an
alarm indicator to warn of open or short circuits in the
cable.
Wide range of audio functions
The HDCU1000/HDCU1500 has connectors for two-
channel microphone outputs, a digital audio output (only
for the HDCU1000), and a program audio input. Further,
the HDCU1000/HDCU1500 can use an intercom system
with two independent channels, and supports four-wire
and RTS/Clear-Com intercom systems.
For information on support for RTS/Clear-Com systems,
contact a Sony service or sales representative.
Remote control
The levels and phases of HDCU1000/HDCU1500 output
signals can be controlled remotely by an MSU-900 series
Master Setup Unit.
Microphone volume control
The camera’s microphone volume can be controlled via
the MIC REMOTE connector.
Character monitor signal output
The results of the HDCU1000/HDCU1500 self-diagnosis
and setup menu can be obtained with a text display by
character signal output.
Rack mountable
The HDCU1000/HDCU1500 may be installed in a
standard EIA 19-inch rack (three units high).
(The HDCU1500 needs the RMM-301 Rack Mount
Adaptor (optional).)
Plug-in unit configuration
Internal printed circuit boards are designed for easy plug-
in and removal, which makes it easy to inspect and
maintain the unit.
