– 3 –
CD SECTION
1. OPERATING THE DISPLAYED HISTORYS
1. Press the DIMMER button, DBFB button, and CD 1
6
but-
ton simultaneously and enter the test mode.
2. Press the PROGRAM button, and mechanical error count and
the cout of “NO DISC” that optical system judged are displyed.
3. Under this condition press the buttons in Table 2, and the re-
spective operations are executed as listed below.
Table 2.
Button
Function
MD/CD 1
Mechanical error cord from latest one to last ten are dis-
played each time this button is pressed. (*1)
MD/CD 2
The reasons of “NO DISC” from latest one to last ten are
displayed each time this button is pressed. (*2)
CD 1
6
Reset the count of mechanical error.
CD 2
6
Reset the count of “NO DISC”.
(*1) Mechanical error code
MD SECTION
1. OPERATING THE ERROR HISTORY MODE
All operations are performed using the MULTI JOG dial
and PROGRAM button.
1. Enter the test mode for MD function. (*1)
2. Turn the MULTI JOG dial and display “ERR DP MODE”.
3. Press the ENTER/YES button, therefor enter the error his-
tory mode and change the display “total rec”.
4. Press the EDIT/NO button, therefor end the error history
mode and change the display “ERR DP MODE”.
(*1) See the “SECTION 4 TEST MODE” (page 21) for
detail of test mode.
Table 1.
Contents
Function
Display
total rec
Total time of laser power high.
r
h
About 20% of total recording time.
total play
Total time of playback.
p
h
retry error
Total count of record and playback
r
p
retry error.
total error
Total count of error.
total
err history
Error contents display of from
0 E
(*2)
latest one“00” to last ten “09”.
(Turn the MULTI JOG dial and
change the error NO.)
err refresh
Press the PROGRAM button and
complete
(*3)
clear the error histories memory
2. OPERATING THE DISPLAYED HISTORYS
1. Turn the MULTI JOG dial and change the display of error
history contents.
2. Press the PROGRAM button and display error history func-
tion.
3. Press the PROGRAM button again and back the display of
error history contents.
(*2) See table 1-1. for contents of each error code.
(*3) Error refresh with optical pick-up exchange, another not ex-
ecute.
Table 1-1.
Display
Contents
(error No./code)
0: E00
No error
0: E01
Disc error PTOC does not read
0: E02
Disc error UTOC does not read
0: E03
Loading error
0: E04
Address does not read
0: E05
Out of FOK
0: E06
Focus does not work
0: E07
Retry of record
0: E08
Record retry error
0: E09
Retry of Playback
0: E0A
Playback retry error
(a)
The number of Mechanical error.
Latest one “00” to last ten “09”
(Turn the MULTI JOG dial and change the error No.)
(b)
“FF”: Mechanical error, when mechanical initialize to
completion.
Others: Mechanical error in the midst of mechanical initialize.
(c)
“4
*
”: Mechanical error in the midst of mechanical initial-
ize, when sub tray set into the stocker.
“5
*
”: Mechanical error in the midst of mechanical initial-
ize, when sub tray take out to the stocker.
(d)
“2
*
”: Mechanical error in the midst of elevator moving.
(*2) NO DISC error code
(a)
The number of NO DISC error.
Latest one “00” to last ten “09”
(Turn the MULTI JOG dial and change the error No.)
(b)
“01”: Focus error
“02”: GFS error
“03”: Set up error
(c)
“00”: NO DISC error (Does not chucking retry)
“02”: NO DISC error (Chucking retry to completion)
(d)
The status, when judged NO DISC error.
“3
*
”: Stop
“4
*
”: Set up
“5
*
”: TOC read
“6
*
”: Access
“7
*
”: Play
“8
*
”: Pause
“9
*
”: Manual search (Play)
M0 =
(a)
(b)
(c)
(d)
* ******
D0
=
(a)
(b)
(c)
(d)
* ******
Summary of Contents for HCD-MD515 - Component For Dhcmd515
