![background image](http://html.mh-extra.com/html/sony/hcd-md1ex-system/hcd-md1ex-system_service-manual_420809023.webp)
– 23 –
Contents
When Lit
When Off
Recording mode ON
Recording mode OFF
ABCD adjustment completed
Focus auto gain OK
Pit
Groove
High reflection rate
Low reflection
CLV-S
CLV-A
CLV LOCK
CLV UNLOCK
5-7.
DISPLAYS DURING TEST MODE
The display changes according to the following sequence each time the
1/u
button is pressed.
1. Mode display
“TEMP ADJUST” and “CPLAYMODE” are displayed.
2. Error rate display
The error rate is displayed as follows.
C = AD =
C = :Indicates the C1 error.
AD = :Indicates ADER.
3. Address display
The address is displayed as follows. (MO: Recordable disc, CD: Disc for palyback only)
When the
[CD-MD SYNC]
button is pressed, the display will switch between groove
and pit.
h = s = (MO pit and CD)
h = a = (MO groove)
h = Indicates the header address.
s = Indicates the SUBQ address.
a = Indicates the ADIP address.
Note:
Displayed as “–” when servo is operated.
4. Auto gain display (Not used in servicing)
The auto gain is displayed as follows.
AG = / [ ]
5. Detrack check display (Not used in servicing)
The detrack is displayed as follows.
ADR =
6. IVR display (Not used in servicing)
IVR is displayed as follows.
[ ][ ][
Meanings of other displays
Mode display
Error rate display
Address display
Auto gain display (Not used in servicing)
Detrack check display (Not used in servicing)
IVR display (Not used in servicing)
Display
REC
ATT
SHUFFLE
TRACK
DISC
LEVEL-SYNC
SYNC
Summary of Contents for HCD-MD1EX - System
Page 2: ... 2 ...
Page 11: ... 11 This section is extracted from instruction manual ...
Page 93: ...115 HCD MD1EX MEMO ...