![background image](http://html.mh-extra.com/html/sony/hcd-hpx10w/hcd-hpx10w_service-manual_420789054.webp)
54
HCD-HPX9
[CD SHIP MODE]
This mode can run the CD sled motor optionally. Use this mode, for
instance, when cleaning the optical pick-up.
Procedure:
1. Press the
@/1
button to turn the power on.
2. Press the
[FUNCTION]
button to select CD function.
3. Press two buttons of
[EX-CHANGE]
and
@/1
simultaneously.
*1
4. Set to the CD ship mode. (chucking on)
5. After blink “STANDBY”, “LOCK” is displayed, disconnect
the AC plug.
*1) If press three buttons of
[DISC SKIP]
,
[EX-CHANGE]
and
[PLAY MODE/TUNING MODE]
simultaneously, Activate the
CD ship mode and MC cold reset.
[CD SLOT LOCK]
This mode is for the antitheft of CD disc in shop. (not for transport)
Procedure:
1. Press the
@/1
button to turn the power on.
2. Press the
[FUNCTION]
button to select CD function.
3. Insert a disc.
4. While pressing the
x
button, press the
A
button for more 5
seconds.
5. The message “LOCKED” is displayed and the disc slot is
locked. (Even if exiting from this mode, the disc slot is still
locked)
6. If press the
A
button to eject the disc, the message
“LOCKED” is displayed and can not eject the disc.
7. To release this lock, while pressing the
x
button, press the
A
button for 5 seconds again.
8. The message “UNLOCKED” is displayed and the disc slot is
unlocked.
[CD ERROR CODE DISPLAY MODE]
This mode can be used for error code display of CD section.
Procedure:
1. Press the
@/1
button to turn the power on.
2. Press the
[FUNCTION]
button to select CD functuion.
3. Press three keys of
x
,
[DSGX]
and
X
TAPE simultaneously.
4. When this mode is activated, mechanism deck error code is
displayed on the fluorescent indicator tube.
5. Press the
m
(remote commander) or
M
(remote
>
(remote
commander) button to change over display of error history.
This mode used to check operation of optical pick-up.
Procedure:
button to select CD functuion.
simultaneously.
4. When the CD servo test mode is activated. In this state each
time
[DISPLAY]
button of remote commander is pressed,
tracking ON/OFF switch is performed.
5. To release this mode, press the
@/1
button.
[CD POWER MANAGE]
This mode is for switch the CD power supply on/off. Even if this
state pulls out AC plug, it is held.
Procedure:
1. Press the
@/1
button to turn the power on.
2. Press the
[FUNCTION]
button to select CD function.
3. Press the
@/1
button again to turn the power off (standby).
4. While pressing the
x
button, press the
@/1
button.
5. It turns power on and display “CD POWER”, then display
“ON” or “OFF”.
[CHANGE-OVER THE AM TUNING INTERVAL]
The AM tuning interval can be changed over 9 kHz or 10 kHz.
Procedure:
1. Press the
@/1
button to turn the power on.
2. Press the
[TUNER/BAND]
button to select TUNER (AM)
function.
3. Press the
@/1
button again to turn the power off (standby).
4. While pressing the
ML
button, press the
@/1
button.
5. It turns power on and display “STEP 9kHz” or “STEP 10kHz”,
and thus the tuning interval is changed over.
[MD/VIDEO FUNCTION CHANGE]
Select either VIDEO or MD of the external input.
Procedure:
1. Press the
@/1
button to turn the power on.
2. Press the
[FUNCTION]
button to select MD or VIDEO function.
3. Press the
@/1
button again to turn the power off (standby).
4. While pressing the
[FUNCTION]
button, press the
@/1
button.
5. The another function of the previous function is selected and
display “MD” or “VIDEO”.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299