5-32
CCD-TRV107E/TRV108E/TRV208E/TRV408E
Color bar signal waveform
Color bar pattern
Fig. 5-3-3. Color bar signal of alignment tapes
1V
0.7V
0.3V
White (100%)
Y
e
llo
w
Cy
an
Green
Magenta
Red
Blue
Burst signal
Horizontal sync signal
0.3V
(100%)
Y
ello
w
Cy
an
Green
Magenta
Red
Blue
White
Blac
k
3-1-5.
Alignment Tape
The following table lists alignment tapes which are available.
Use the tape specified in the signal column for each adjustment. If the type of tape to be used for checking operations is not specified, use
whichever type.
Alignment tape
Tape type:
ME .................................. Particle type metal tape
MP ................................... Evaporated type metal tape
Table. 5-3-3.
Fig.5-3-3. shows the 75% color bar signals recorded on the alignment tape.
Note:
Measure using the VIDEO terminal (Terminated at 75
Ω
).
3-1-6.
Output Level and Impedance
Video output
Stereo minijack,
1Vp-p, 75
Ω
, unbalanced, sync negative
S video output
4-pin mini DIN
Luminance signal:
1Vp-p, 75
Ω
, unbalanced, sync negative
Chrominance signal:
0.300Vp-p, 75
Ω
, unbalanced
Audio output
Stereo minijack:
–7.5dBs, (at load impedance 47k
Ω
), impedance less than
2.2k
Ω
3-1-7.
Recording Mode (Standard 8/Hi8) switching
The record mode (Standard 8/Hi8) of this unit switches as shown in
the following table. The playback mode (Standard 8/Hi8) switches
automatically according to the recording mode of the tape played
back.
Tape Used
Recording Mode
ME
Hi8
Hi8 MP
MP
Standard 8
Name
Tracking
(WR5-1CP)
Video frequency characteristics
(WR5-7CE)
Operation check
(WR5-5CSP)
Operation check
(WR5-8CSE)
Operation check
(WR5-4CL)
Operation check
(WR5-8CLE)
BPF adjustment
(WR5-11CS)
Tape speed
SP
LP
SP
SP
LP
LP
SP
Usage
Tape path adjustment, Switching position
adjustment
Frequency characteristics adjustment
Operation check
BPF adjustment
Recording mode
Standard 8
Hi8
Standard 8
Hi8
Standard 8
Hi8
Standard 8
Tape type
MP
ME
MP
ME
MP
ME
MP
