99
Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
GB
The menu settings have been changed
automatically.
While Intelligent Auto is active, some menu
settings related to image quality will be
changed automatically.
The following menu items return to the
default settings when you switch between
movie recording and photo recording and
playback modes.
[
Fader]
[
Self-Timer]
[Tele Macro]
Your camcorder gets warm.
Your camcorder may become warm during
operation. This is not a malfunction.
A rattling noise can be heard when you
shake the camcorder.
If no noise is heard when the camcorder is
turned on and is in the movie/photo recording
mode, the noise is produced by the movement
of the internal lens. This is not a malfunction.
Intelligent Auto is canceled.
The Intelligent Auto setting is canceled if you
change the following settings:
[Smth Slw REC]
[Golf Shot]
[White Balance]
[Spot Meter/Fcs]
[Spot Meter]
[Spot Focus]
[Exposure]
[Focus]
[IRIS]
[Shutter Speed]
[Low Lux]
[Scene Selection]
[
Cinematone]
[Tele Macro]
[
SteadyShot]
[
SteadyShot]
[Auto Back Light]
[NIGHTSHOT Light]
[Face Detection]
The supplied Wireless Remote
Commander does not function.
Set [Remote Ctrl] to [On] (p. 95).
Insert a battery into the battery holder with
the +/– polarities correctly matching the
+/– marks (p. 125).
Remove any obstructions between the
Wireless Remote Commander and the remote
sensor.
Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Wireless Remote
Commander may not function properly.
Another DVD device malfunctions when
you use the supplied Wireless Remote
Commander.
Select a commander mode other than DVD 2
for your DVD device, or cover the sensor of
your DVD device with black paper.
Batteries/power sources
The power abruptly turns off.
Use the AC Adaptor.
In the default setting, when about 5 minutes
have elapsed while you do not operate your
camcorder, the camcorder is automatically
turned off (A. Shut Off). Change the setting
of [A. Shut Off] (p. 95), or turn on the power
again.
Charge the battery pack (p. 14).
The /CHG (flash/charge) lamp does
not light while the battery pack is being
charged.
Close the LCD screen (p. 14).
Attach the battery pack to the camcorder
correctly (p. 14).
