Table of C
on
ten
ts
Enjo
y U
seful F
unc
tions
Inde
x
GB
Movie: Play the desired movie, and then
touch
at the point you want to
use in a Highlight Playback.
Photo: Play the photo you want to use in a
Highlight Playback, and then touch
.
Notes
You cannot set a Highlight point when the Map
View is displayed (HDR-CX560VE/CX700VE).
However, the Highlight point that was set when
the Event View was displayed can take effect on
the Map View.
The audio used for the Highlight Playback will
be converted to 2ch stereo.
The [Playback Range] setting is cleared when
the Highlight Playback stops.
When you connect the camcorder to an
external device, such as a TV, and watch
Highlight Playback or Highlight Scenario, these
images do not appear on the LCD screen of the
camcorder.
Tips
You can select [Highlight Setting] on the screen
after a Highlight Playback has finished.
You can transfer music files from audio CDs
or MP3 files to your camcorder, and play
them with Highlight Playback using the
supplied software “PMB” or “Music Transfer,”
a software installed together with “PMB.”
(HDR-CX690E/CX700E/CX700VE)
After the music file is transferred to the
camcorder, if you cannot play the music, the
music file may be damaged. Delete the music
file by touching
(MENU)
[Setup]
[ (Playback Settings)]
[Empty
Music], then transfer the music file again. If
you delete music files using [Empty Music],
the music data recorded on your camcorder
at the factory will be deleted too. In this case,
you can restore them using Music Transfer, a
software installed together with “PMB.” For
operating instructions, see Music Transfer help
(HDR-CX690E/CX700E/CX700VE).
Saving Highlight Playback
(
Scenario Save)
You can save a Highlight Playback as a
“Scenario.”
Touch
[
Scenario Save]
during Highlight Playback.
To play back a saved scenario
Touch
(MENU)
[Playback Function]
[ Scenario], select the desired scenario, and
then touch
.
To erase a saved scenario
Touch [ Scenario Erase] on the screen
after the scenario playback you want to
erase has finished, or touch while
playing the scenario you want to erase, then
select [Erase].
