63
Addi
tion
al
I
n
fo
rm
at
io
n
To remove dust from inside the
viewfinder
1
Pull out the viewfinder.
2
While pushing in the tab on the side
with a fine-tipped implement such as a
ball point pen, pull the eyecup block in
the direction of the arrow to remove.
3
Remove dust from the eyecup block
with a camera blower, etc.
4
Press the viewfinder onto the body of
the camcorder.
5
Remove dust from the inside area where
the eyecup block was attached with a
camera blower, etc.
6
Attach the eyecup block to the
viewfinder, pushing it straight on until it
clicks.
b
Notes
• The eyecup block is a precision part. Do not
disassemble it further.
• Do not touch the lens of the eyecup block.
On charging the pre-installed
rechargeable battery
Your camcorder has a pre-installed
rechargeable battery to retain the date, time,
and other settings even when the POWER
switch is set to OFF(CHG). The pre-
installed rechargeable battery is always
charged while your camcorder is connected
to the wall socket via the AC Adaptor or
while the battery pack is attached. The
rechargeable battery will be fully
discharged in about
3 months
if you do
not use your camcorder at all without the
AC Adaptor connected or the battery pack
attached. Use your camcorder after
charging the pre-installed rechargeable
battery.
However, even if the pre-installed
rechargeable battery is not charged, the
camcorder operation will not be affected as
long as you are not recording the date.
x
Procedures
Connect your camcorder to a wall socket
using the supplied AC Adaptor, and leave it
with the POWER switch set to OFF(CHG)
for more than 24 hours.
Tab
Continued
,
