89
A
d
d
iti
o
n
a
l I
n
fo
rm
a
tio
n
Timer recording is not complete or did not start
from the beginning.
,
There was a power failure during recording.
,
The recorder’s internal clock stopped due to a
power failure that lasted for more than 30
minutes. Reset the clock (page 76). Reset the
clock (page 76).
,
The channel or input changed from the one you
are recording.
,
The program that starts first has priority and the
second program starts recording only after the
first program has finished. If the programs start
at the same time, the program listed first in the
menu has priority (page 50).
,
There is not enough disc space for the recording.
The
c
indicator flashes after timer recording is
set.
,
Insert a recordable disc (page 30).
,
The disc does not have any space for recording.
,
The disc has 99 or more titles, which prevents
further recording.
,
The disc is protected (page 67).
The SYNCHRO REC indicator flashes after
Synchro-Recording is set.
,
Insert a recordable disc (page 30).
,
The disc has 99 or more titles, which prevents
further recording.
,
The disc is protected (page 67).
Contents previously recorded were erased.
,
Data that has been recorded on a DVD with a PC
will be erased from the disc when the disc is
inserted.
Display
Menus or displays do not appear on the
screen.
,
While the recorder is reading disc information,
the System Menu, OPTIONS menu, or
information display will not appear.
“- -:- -” appears in the front panel display.
,
Set the clock again (page 76).
The
c
indicator is flashing.
,
The disc does not have any space for recording.
,
Insert a recordable disc inside the recorder.
The recording mode indication is incorrect.
,
Since the recording mode for recorded titles is
calculated after sampling the recorded data
during playback, it may be displayed differently
from the mode you selected when recording.
However, the actual recording itself is correctly
made in the selected mode.
Remote control
The remote does not function.
,
Batteries are weak.
,
The remote is too far from the recorder.
,
The remote’s manufacturer code returned to the
default setting when you replaced the batteries.
Reset the code (page 21).
,
Turn on the recorder.
,
The remote is not pointed at the remote sensor on
the recorder.
,
Different command modes are set for the
recorder and remote. Set the same command
mode (page 22).
Other Sony equipment responds to the remote.
,
The same command mode is set for both the
Sony DVD equipment. Set a different command
mode for the recorder (page 22).
Others
The recorder does not operate properly.
,
Restart the recorder. Press down
"/1
on the
recorder for more than ten seconds until “SONY
DVD” appears in the front panel display.
,
When static electricity, etc., causes the recorder
to operate abnormally, turn off the recorder and
wait until the clock appears in the front panel
display. Then, unplug the recorder and after
leaving it off for a while, plug it in again.
The disc tray does not open after you press
Z
OPEN/CLOSE.
,
It may take a few seconds for the disc tray to
open after you have recorded or edited a disc.
This is because the recorder is adding disc data to
the disc.
,
continued
Summary of Contents for GX355 - RDR DVD Recorder
Page 5: ...5 ...
Page 29: ...29 Hookups and Settings ...
Page 107: ......
Page 128: ...Sony Corporation Printed in China AK68 01330A ...
