[5]
Convergent-Design.com
4K/2K RAW Recording
4.
SETUP FS700 HIGH FRAME RATE
MENU » CAMERA SET » SLOW AND QUICK » RAW 2K SUPER SLOW » EXECUTE
Select your desired frame rate*:
NTSC
120
240
PAL
100
200
TIME SAVER TIP:
A quicker way of doing this is once the S&Q is set to RAW HIGH SPEED,
you can press and hold the S&Q button, then once the RAW Super Slow frame is highlighted,
you can now switch from 120 to 240. (or 100 to 200 in record.)
ACCESS HIGH FRAME RATES
Press the S&Q button » Select 120fps or 240fps
The Odyssey also has the ability of recording the buffered 4K 100/120 p from the FS700. If you
wish to record this set the camera to 4K RAW, and enable S&Q. Then the Odyssey will record
4K100/120, for up to a 4 second burst.
4K 100/120 burst is now supported in 4K to 2K/HD ProRes.
RAW 4K Super Slow 120fps and 100 fps
Start Trigger - > 440 Frames
End Trigger -> 440 Frames
End Half Trigger -> 220 Frames
Start Trigger Processes 440 frames from when RECord button is pressed.
End Trigger Sends a buffer of the 440 frames prior to hitting the REC button.
End Half Trigger sends a buffer of the 220 frames prior to hitting the REC button.
120fps is 3.7 seconds record time - (440 frames) - 60fps playback
100fps is 4.4 seconds - (440 frames) - 50fps playback
5.
PAL:
25P, 50P, 100P AND 200P
MENU » OTHERS » 60i/50i SEL » YES
6.
SETUP RECORD TRIGGER (FS700 REC BUTTON)
MENU » REC/OUT SET » VIDEO OUT » SDI/HDMI CONTROL » ON
7.
DUAL RECORD: FS700 IN ODYSSEY
MENU » REC/OUT SET » RAW REC CONTROL » RAW+HD
(BACK)
» REC/OUT SET » HD SIMULTANEOUS REC » ON
Note: The clip name from the FS700 is not sent over the SDI to the Odyssey, thus if you wish to
use the internal media as an offline, you will need to rename the internal media to match the RAW
files.
