[16]
Convergent-Design.com
Uncompressed DPX Recording
Odyssey Configuration
1.
SET ODYSSEY TO FS700 TO UNCOMPRESSED DPX MODE
☼
» SETUP » CAMERA --> SONY FS7/FS700 » HD->4:4:4 (.DPX)
Click OK - The unit will restart.
2.
MAKE FS700 THE RECORD TRIGGER
☼
» SETUP » RECORD TRIGGER » CAMERA
3.
SET TIMECODE SOURCE
☼
» SETUP » TIMECODE SOURCE » SDI/HDMI
4.
FORMAT SSDs
☼
» ODYSSEY » SSD’S » FORMAT BOTH
(or FORMAT SSD1 if you do not have a second SSD drive installed.)
5.
CONNECT TO CAMERA AND VERIFY STATUS INPUT
Connect FS700 3G-SDI output to Odyssey SDIA input
SDI CABLES
Use only 3G-SDI rated cables from FS700 to Odyssey. Using a 1.5G SDI cable in not recommended
and may cause issues.
The status on your Odyssey will display your camera’s output.
Example:
1920x1080
29.97
DPX
4:4:4