Press and hold the circled part to unlock, then slide it in the opposite direction of step 2.
Note
The flat adhesive mount and curved adhesive mount cannot be used again once they are
detached from the location surface.
When detaching, peel off slowly. If peeled off forcibly, the surface on which the mount is
fixed might be damaged.
Before attaching, check the surface of the item to be used. If it is dirty, or dust, moisture
or oily substances are attached, adhesive strength may be impaired and the item could
detach with slight impact.
Use the appropriate adhesive mount (flat or curved) for the surface where the camera will
be located. If the mount is not suitable for the surface, it may detach by slight impact.
Thread a suitable leash through the leash attachment hole of the waterproof case, then
attach the leash to an item you intend to use with the camera.
Before use, confirm that the screw hole on the attachment buckle is not loose, and the flat
or curved adhesive mount is securely attached to the surface.
[18] How to use
Shooting
Shooting movies and still images
About the REC HOLD (lock) switch
The REC HOLD (lock) switch can prevent accidental operation.
Slide the REC HOLD (lock) switch in the HOLD direction to lock the REC button. To release
the lock, slide it in the opposite direction.
Before recording, release the lock.
If you lock the camera while recording, the recording state will be kept
*
.
If you lock the camera after you stop recording, the stopped state will be kept
*
.
*
Release the lock to change the setting.
FDR-X1000V
