Sony FDR-X1000V How To Use Manual Download Page 117

Page: 117 / 124

Disconnect the micro USB cable (supplied), and then reconnect it.

Use the micro USB cable (supplied).

Charge the battery pack in an ambient temperature of 10°C to 30°C (50°F to 86°F).

Turn on the computer and connect the camera.

Release the computer from sleep or hibernation status.

Connect the camera directly to a computer using the micro USB cable (supplied).

Connect the camera to a computer with the operating system that is supported by the

camera.

[110] Troubleshooting

Troubleshooting

Battery pack and power

The remaining charge indicator is incorrect.

This phenomenon occurs when you use the camera in an extremely hot or cold location.

A discrepancy arose between the remaining charge indicator and the actual remaining

battery charge. Fully discharge the battery pack once, then charge it to correct the

indication.

Fully charge the battery pack again. If the problem persists, the battery pack is worn out.

Replace the battery pack with a new one.

[111] Troubleshooting

Troubleshooting

Memory card

Operations using the memory card cannot be performed.

If you use a memory card formatted on a computer, format it again on the camera.

[112] Troubleshooting

Troubleshooting

Shooting images

Cannot record images.

Check the free capacity of the memory card.

[113] Troubleshooting

Troubleshooting

Shooting images

Summary of Contents for FDR-X1000V





























































































































Search results

Summary of Contents for FDR-X1000V

Reviews:

Related manuals for FDR-X1000V

Brands by name

Popular brands

Sony FDR-X1000V, How To Use Manual

Search results

Summary of Contents for FDR-X1000V

Reviews:

Related manuals for FDR-X1000V

Brands by name

Popular brands