Sony Electronic Viewfinder HDVF-C30W, Maintenance Manual

Page: 17 / 60

1-11 (E)
HDVF-C30W
3. Peel off the anti-glare sheet (Upper) and (Lower) from
the viewfinder barrel.
4. Peel off the protection sheet of the new anti-glare sheet
(Upper). Align the new anti-glare sheet with the sides
“a” and “b” of the viewfinder barrel. Attach the new
anti-glare sheet (Upper) to the viewfinder barrel.
Precaution for attaching the anti-glare sheet
(Upper)
. Fold the sides “e” and “f” of the sheet so that they fit
to the shape of the barrel and then attach them.
.
Attach the anti-glare sheet (Upper) including the
sides “e” and “f” with care so that the anti-glare
sheet (Upper) should not float or should not create
any wrinkle.
5. Similarly, align the anti-glare sheet (Lower) with the
sides “c” and “f” and attach it to the viewfinder barrel.
6. Install the removed parts by reversing the steps 1 and 2
of removal.
1-8. Setup after Replacement of the
Main Parts and Board
1-8-1. When the LCD Panel is Replaced
Return the settings of the switches S1 (C-2) and S2 (B-2)
on the PR-267 board to the default setting when shipped
from the factory.
S1-6 to S1-8 : OFF (Preset the chromaticity setting.)
S2-1 to S2-4 : All OFF
1-8-2. When the PR-267 Board is Replaced
Set the switches S1 (C2) and S2 (B-2) settings to the
original setting of the board.
a
a
b
b
e
c
d
f
Anti-glare sheet
(Upper)
Protection sheet