Sony Electronic Viewfinder HDVF-C30W, Maintenance Manual

Page: 11 / 60

1-5 (E)
HDVF-C30W
S2 Switch
Ref. No. Description Factory setting
S2-1, 2 Selects whether to enlarge the range of color temperature
adjustment range or not on the y-axis of the chromaticity diagram
with the use of the switch S1-6 to S1-8.
S2-1 S2-2 Chromaticity (y-axis direction)
(WB _ _
_ _ _
Y) (WB + +
+ + +
Y)
OFF OFF Factory default setting (As shown in
1
on the
following diagram)
ON OFF Chromaticity is adjusted toward the minus
(Magenta) direction. (As shown in
2
on the
following diagram)
OFF ON Chromaticity is adjusted toward the plus (Green)
direction. (As shown in
3
on the following diagram)
ON ON
_
n
The switches S2-1 and S2-2 should be adjusted in combination
with the switches S1-6 through S1-8.
S2-3 Selects direction of the display scanning forcibly from the right or the left.
OFF : Normal direction (The switch S2 on the VR-208 board is enabled.)
ON : Direction of scanning can be selected forcibly (The switch S2 on the
VR-208 board is disbled.)
S2-4 TEST SAW waveform output switch
ON : Generates the TEST SAW waveform within viewfinder.
Use the TEST SAW signal to check the video signal system using the
EX-909 board.
1 2 3 4
All OFF
ON
R
G
B
y
x
1
2
3