Sony Electronic Viewfinder HDVF-C30W, Maintenance Manual

Page: 15 / 60

1-9 (E)
HDVF-C30W
1-7-3. Replacing the Anti-Glare Sheet
The three different types of anti-glare sheet are used as
shown below in this model.
Replace the desired type of anti-glare sheet as necessitated.
Replacing the Anti-Glare Sheet (Ring)
Required part
Anti-glare sheet (Ring) 1 piece : 3-789-426-xx
1. Push the RELEASE knob to release the lock and
remove the viewfinder barrel. (Refer to Section 1-7-2,
step 1.)
2. Rotate the fixed ring fully in the direction of the arrow
A and align the key marks (red lines) of the fixed ring
with that of the viewfinder barrel. Then remove the
viewfinder lens unit.
n
Be extremely careful not to give any scar on the
polarizing filter surface of the viewfinder lens unit
during the removal and installation procedures.
Polarizing filter surface
Viewfinder barrel
Viewfinder
lens unit
Fixed ring
Fixed rings
Red lines
Red lines
A
Tapping screws
M2
x 5
Bayonet ring
(TUBE)
Tapping screws
M2
x 5
3. Remove the six screws (tapping screw M2 x 5) and
remove the bayonet ring (TUBE) from the viewfinder
barrel.