EBS-N200 Network Display Adapter
27
Control Web Pages,
continued
Picture Mode
The
Picture Mode
section allows you to control the color scheme
displayed on the display by using preset values. There are two
types of preset values: values that are preset by the factory and
values that are preset by a user. For example, press the
Standard
button to use the factory default settings for bright,
contrast, color, phase and volume corresponding to the device
and model specified, or press the
User1
button to use user
defined default settings.
Note
: The buttons displayed in the
Picture Mode
section exactly
correspond to the controls available in the on-screen setup menu
for the display. These are the controls that are accessible using
the display’s remote control. For more information, refer to the
user guide for the display.
To change a setting, perform the following steps:
1. Press a button, for example
Standard
, to use the default
color scheme associated with that button. You cannot
manually change the settings associated with that button
by using the picture/volume sliders.
To define user default settings, perform the following steps:
1. Press the button for which you want to define default
settings, for example
User1
,
User2
, or
User3
.
2. In
the
Picture/Volume
section, place your cursor over the
slider of the setting that you want to change.
3. Click and hold down your left mouse button and drag the
slider to the new setting.
4. Release your left mouse button.
5. Repeat steps 2 through 4 for each setting that you want to
change. These settings are automatically saved and each
time you press the associated button, the default color
scheme is applied.
