EBS-N200 Network Display Adapter
54
Appendix A,
continued
Playlist File Format,
continued
Screen Saver
- The Screen Saver Mode places the display into
an internal Screen Saver Mode, i.e. ORBIT, INVERSE SCREEN,
etc. The mode is an index into a ScreenSaver table that has the
various mode supported by the display. The default is ON. To
disable the Screen Saver mode the value of OFF is used as the
optional value.
Input
- The Input command selects the input for which the display
used for video input. The number is an index into the Input Table
which is setup via the website.
Power
- The Power command powers the display either On or Off
depending on the state of the option. The default option is ON.
Pause
- This command pauses the current playlist. To resume
the playlist from this state is to receive a Trigger command from
an external source.
Switch
- The Switch command allows the linking of playlists. The
execution of this command changes the active playlist. A second
option, index is used to determine the entry point, or the start of
execution of the given playlist. The default Index is 0, the
beginning of the playlist.
Delay
- This commands allows the playlist to wait time described
by time unit and a number before executing the next command
line in the List Section. This is useful command for example upon
powering up the display, the picture may not be visible for several
seconds, so the playlist must be delayed for the screen to warm-
up.
