EBS-N200 Network Display Adapter
25
Control Web Pages,
continued
Power
The
Power
button turns the display on and off.
Refer to the following table to determine the status of the display:
If the Power button is…
Then, the display is…
Depressed and the indicator
light is green
Turned on
Not depressed and the
indicator light is red
In standby mode
Not depressed and the
indicator light is gray
Undefined or error condition
To turn a display on, perform the following steps:
1. Press
the
Power
button. The button remains depressed
and the indicator light turns green.
To change a display to standby mode, perform the following
steps:
1. With
the
Power
button depressed, press the button again.
The button returns to the original position and the
indicator light turns red.
Input Selection
The
Input Selection
section allows you to select the source of the
input signal to the EBS-N200.
The device and model displayed in the
General Information
section determine the buttons available in this section.
To change the input selection, perform the following steps:
1. Press the button corresponding to the input selection you
want to activate. If the command is successful, the display
displays video from that input. If the command is not
successful, the button returns to its original position.
