SELP1650 (E 3.5-5.6/PZ 16-50 OSS) (E PZ 16-50mm F3.5-5.6 OSS)
4-3
Fig.4-2-6
5. The installer start up screen appears, then click the [Next] button to start the installation.
6. The following screen appears when the installation is complete, then click the [Close] button.
7. Create a shortcut icon of the E-Mount Lens Adjustment (Adjustment Application for Service) on the desk top.
4-3-1. Method for Starting and Finishing the E-Mount Lens Adjustment
4-3. E-MOUNT LENS ADJUSTMENT
1.
Starting the E-Mount Lens Adjustment
* After replacing the Service Exclusive Optics Block, click the [Service Flag OFF (S)] button to release the specified plug before using the E-Mount
Lens Adjustment.
* Make sure to disconnect the AC adaptor after finishing the adjustment (including the case when stops due to an error).
* SeusEX will start when the E-Mount Lens Adjustment is started.
1) Start the E-Mount Lens Adjustment.
2) Click the [Connect] button and check if the connection status becomes “Connect”.
2.
Finishing the E-Mount Lens Adjustment
1) Click the [Disconnect] button and check if the connection status becomes “Disconnect”.
2) Click the [
°
] button on the upper right of the main window to finish.
Fig.4-3-2
Fig.4-3-1
Fig.4-2-4
Fig.4-2-5
4. The folder select screen appears, then select the installing user and click the [Next] button.
Everyone:
For all users of the PC for installing.
Just me:
Only for the user who logs in the PC now.
Fig.4-2-3
