SELP1650 (E 3.5-5.6/PZ 16-50 OSS) (E PZ 16-50mm F3.5-5.6 OSS)
2-6E
7. Turn the Zoom Cam Tube in the direction of the arrow A while pressing the 1st Lens Assy to set the lens at the WIDE end.
At this time, pass the three projections of the 2nd Lens Assy through the three holes in the Fixed Ring.
1st Lens Assy
Zoom Cam Tube
A
Projections of the 2nd Lens Assy
Adhesive bond (B-60): J-6082-616-A
1. Attach the 1st Lens Assy to the 1st Moving Frame while positioning them as shown below.
2. Put the two 1st Holding Springs.
3. Apply bond (B-60) to the two screw threads of the 1st Moving Frame.
4. Position the 1st Light Shield Ring as shown below, attach it to the 1st Moving Frame, and then firmly turn the 1st Light Shield Ring counterclock-
wise.
Apply the adhesive
bond (B-60)
1st Moving Frame
Wall surface
of the hole
1st Holding Springs
1st Lens Assy
Hole (small)
Cutout
Cutout
1st Light Shield Ring
1st Light Shield Ring
Click portion
