background image

4

You are cautioned that any changes or modifications not expressly 
approved in this manual could void your authority to operate this 
equipment.

All interface cables used to connect peripherals must be shielded in 
order to comply with the limits for a digital device pursuant to 
Subpart B of Part 15 of FCC Rules.

If you have any questions about this product, you may call ;
Sony Customer Information Service Center 1-800-222-7669 or 
http://www.sony.com/

For the customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

For the customers in Europe

Hereby, Sony Corporation, declares that this ZRX-HR70 is in 
compliance with the essential requirements and other relevant 
provisions of the Directive 1999/5/EC. 
For details, please access the following URL: http://
www.compliance.sony.de/

Voor de klanten in Europa

Hierbij verklaart Sony Corporation dat het toestel ZRX-HR70 in 
overeenstemming is met de essentiële eisen en de andere relevante 
bepalingen van richtlijn 1999/5/EG.
Nadere informatie kunt u vinden op:
http://www.compliance.sony.de/

För kunder i Europa

Härmed intygar Sony Corporation att denna ZRX-HR70 står I 
överensstämmelse med de väsentliga egenskapskrav och övriga 
relevanta bestämmelser som framgår av direktiv 1999/5/EG.
För ytterligare information gå in på följande hemsida: http://
www.compliance.sony.de/

Para clientes na Europa

Sony Corporation declara que este ZRX-HR70 está conforme com 
os requisitos essenciais e outras disposições da Directiva 1999/5/
CE. 
Para mais informacoes, por favor consulte a seguinte URL: 
http://www.compliance.sony.de/

Til europæiske kunder

Undertegnede Sony Corporation erklærer herved, at følgende 
udstyr ZRX-HR70 overholder de væsentlige krav og øvrige 
relevante krav i direktiv 1999/5/EF.
For yderligere information gå ind på følgende hjemmeside: 
http://www.compliance.sony.de/

Asiakkaille Euroopassa

Sony Corporation vakuuttaa täten että ZRX-HR70 tyyppinen laite 
on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien 
direktiivin muiden ehtojen mukainen.
Halutessasi lisätietoja, käy osoitteessa:
http://www.compliance.sony.de/

For kunder i Europa

Sony Corporation erklærer herved at utstyret ZRX-HR70 er i 
samsvar med de grunnleggende krav og øvrige relevante krav i 
direktiv 1999/5/EF. 
For flere detaljer, vennligst se: 
http://www.compliance.sony.de/

Για τους πελάτες που διαμένουν σε χώρες της 
Eυρώπης

Με την παρούσα η Sony Corporation δηλώνει τι ZRX-
HR70 συμμορφώνεται προς της ουσιώδεις απαιτήσεις 
και τις λοιπές σχετικές διατάξεις της οδηγίας 1999/5/ΕΚ.
Για λεπτομέρειες παρακαλούμε πως ελένξετε την 
ακλουθη σελίδα του διαδικτύου:
http://www.compliance.sony.de/

Pro zákazníky v Evropě

Sony Corporation tímto prohlašuje, že tento ZRX-HR70 je ve 
shodě se základními požadavky a dalšími příslušnými 
ustanoveními směrnice 1999/5/ES.
Podrobnosti lze získat na následující URL:

http://www.compliance.sony.de/

Klientidele Euroopas

Sony Corporation kinnitab käesolevaga seadme 

ZRX-HR70

 

vastavust 1999/5/EÜ direktiivi põhinõuetele ja nimetatud 
direktiivist tulenevatele teistele asjakohastele sätetele.
Üksikasjalikum info: http://www.compliance.sony.de/.

Európai ügyfeleinknek

Alulírott, Sony Corporation nyilatkozom, hogy a(z) ZRX-
HR70 megfelel a vonatkozó alapvető követelményeknek és az 
1999/5/EC irányelv egyéb előírásainak.
További információkat a következő weboldalon találhat:
http://www.compliance.sony.de/

Dla klientów w Europie

Niniejszym Sony Corporation oświadcza, że ZRX-HR70 jest 
zgodne z zasadniczymi wymaganiami oraz innymi stosownymi 
postanowieniami Dyrektywy 1999/5/WE.
Szczegółowe informacje znaleźć można pod następującym 
adresem URL:
http://www.compliance.sony.de/

Pentru clienţii din Europa

Prin prezenta, Sony Corporation declară că acest ZRX-HR70 
respectă cerinţele esenţiale și este în conformitate cu 
prevederile Directivei 1995/5/EC.
Pentru detalii, vă rugăm accesaţi următoarea adresă:
http://www.compliance.sony.de/

Declaration of Conformity

Trade Name : SONY
Model : ZRX-HR70
Responsible party : Sony Electronics Inc.
Address : 16530 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules. 
Operation is subject to the following two conditions: (1) this 
device may not cause harmful interference, and (2) this 
device must accept any interference received, including 
interference that may cause undesired operation.

Summary of Contents for DWZB70HL






























Reviews: