Sony DWZB70HL, Operating Instructions Manual

Page: 14 / 29

Attaching the Supplied Accessories
14
Attaching the Supplied Accessories
to the Half-Rack Receiver (ZRX-
HR70)
Attaching the antenna
To remove the feet
Attaching the Supplied Accessories
to the Body-Pack Transmitter (ZTX-
B02RC)
Attaching the belt clip
To attach to a belt
Depending on the thickness and width of the strap, the
belt clip may not attach securely.
Using the Headset Microphone
(ECM-HZ1UBMP)
Wearing the microphone
Insert the supplied antenna into the
ANTENNA a/b connector at the rear of
the receiver and turn it.
Use a flat-bladed screwdriver or
similar tool to remove the pins that
secure the feet, and then remove the
feet from the half-rack receiver.
Align the mounting hole at the rear of the transmitter with the
hole in the middle of the supplied belt clip, and secure the belt
clip using the supplied belt clip screw.
You can also rotate the belt clip 180 degrees or 90 degrees to
the left or right before securing it.
Caution
Slide the belt into the belt clip on the unit
completely, and make sure it is secure.
The ECM-HZ1UBMP is designed to be worn on either ear.
Press the ear clip in the direction of the arrows to fit the shape
of the ear.
To improve sound collection, adjust the sound collector (
1
) of
the microphone unit so that is faces the mouth by using the
guideline (protrusion (
2
)) as a guide.