Sony DWZB70HL, Operating Instructions Manual

Page: 10 / 29

Parts Identification
10
b
POWER indicator
Lights when the unit is turned on.
c
Display
Displays setting configurations and other information.
A
Receiving channel indicator
Displays the receiving channel.
B
Encryption status display
Displays whether encrypted transmission is enabled.
C
Remaining transmitter battery indicator
Displays the remaining battery charge of the transmitter.
An approximate duration is displayed for the remaining
usage time. This duration appears only when signals are
being received.
D
Audio level meter
Displays the audio level.
Set the audio level so that the red bar is not displayed
continuously.
E
FBR (feedback reducer) status indicator
Displays the status of the feedback reducer in one of four
levels (Off, Low, Mid, High).
F
EQ (equalizer) status indicator
Displays the on/off status of the equalizer.
G
Receiving level indicator
Displays the reception status of the radio signal.
More bars indicate more stable reception.
d
ESC (escape) button
Cancels operations, or returns to the main screen from the
settings screen.
e
Rotary encoder
Allows you to change settings.
For details on changing settings, see “Receiver Settings”
(page 15).
a
ANTENNA a/b connector (BNC type)
Connect the supplied antenna here.
b
UNBALANCED OUTPUT AUX/TUNER
(external audio output) connector (headphone
jack)
Connect monitoring equipment and similar peripheral
devices here.
You can configure muting based on your intended use.
For details on settings, see “Configuring the transmitter
muting function for the output connectors” (page 17).
For details on connections, see “System Configuration
Examples” (page 22).
c
UNBALANCED OUTPUT MAIN (main audio
output) connector (headphone jack)
Connect a mixer or an amp here.
You can configure muting based on your intended use.
For details on settings, see “Configuring the transmitter
muting function for the output connectors” (page 17).
For details on connections, see “System Configuration
Examples” (page 22).
d
BALANCED OUTPUT connector (XLR type)
Connect a mixer or similar device here.
You can configure muting based on your intended use.
For details on settings, see “Configuring the transmitter
muting function for the output connectors” (page 17).
For details on connections, see “System Configuration
Examples” (page 22).
e
MIC/LINE (audio output level) selector
Selects the audio output level of the BALANCED
OUTPUT connector.
MIC: Sets the audio output level to the mic level.
LINE: Sets the audio output level to the line level.
Do not set the selector to the LINE position while
outputting audio to an audio mixer or similar device.
Inputting audio at excessive levels may distort audio or
damage the playback/recording device.
Caution
Rear