background image

3

Features

The DWM-02N is a digital wireless microphone that 
features an interchangeable microphone capsule unit 
design, and is intended for use in UHF synthesized 
wireless microphone systems. The DWM-02N can be used 
in vocal performances, interviews, speeches, and a variety 
of other applications.

What is DWX?

DWX refers to Sony’s new digital wireless microphone 
system. The DWX series reflects Sony’s extensive 
expertise in professional microphones and sound design. It 
represents a successful blend of Sony know-how, wireless 
technology renowned for stability, and cutting-edge digital 
audio technology.
In addition to realizing the high sound quality possible 
with a digital system, the DWX series supports multi-
channel simultaneous operation, encrypted transmission, 
and metadata transmission for monitoring the status of 
multiple transmitters. Using a main link and a separate 
additional link, remote control of transmitters from the 
receiver is also possible. With its many advanced features, 
the system has the potential to revolutionize the workflow 
of professional applications.

What is WiDIF-HP?

WiDIF-HP (WiDIF: Wireless Digital Interface Format, 
HP: High Profile) is a wireless digital audio interface 
format developed by Sony.
It enables highly secure transmission with high sound 
quality and low system latency, and supports simultaneous 
multi-channel operation.

What is Cross Remote?

Cross Remote is a system that allows transmitters to be 
monitored and controlled from a receiver and the Wireless 
Studio control software installed on a computer connected 
to the receiver.
For example, the settings of a transmitter worn under 
clothing can be easily changed over the wireless link.

Wide RF carrier frequency range

The DWM-02N microphone covers an extremely wide RF 
carrier frequency range. Depending on the model, the 
transmitter can cover bandwidths between 48-MHz and 
72-MHz (e.g., 72-MHz with the CE42 

1)

) — much wider 

than 24-MHz of the analog wireless microphone system. 
This remarkably wide coverage on a single model offers 
cost efficiency and operational convenience, because it 
allows one microphone to be operated in many different 
areas.

1) Carrier frequencies differ depending on the model.

Interchangeable microphone capsule

Coupled with a Sony microphone capsule unit (not 
supplied), the DWM-02N can be used in vocal 
performances, interviews, speeches, and a variety of other 
applications. You can mount a microphone capsule unit by 
simply screwing it onto the capsule mounting area at the 
top of the DWM-02N. The capsule mounting area has 
standard dimensions with a diameter of 31.3 mm and a 
pitch of 1.0 mm (1.25"/28 thread pitch).

Capability of accepting wide range of 
sound pressure level

For details, see “Setting the Audio Input Level (INPUT 
LEVEL)” on page 12.

Three audio codec modes

Switch between audio codec modes based on your 
operational needs.

For details, see “Setting the audio codec mode (CODEC 
MODE)” on page 13.

Switchable RF output power

For details, see “Setting the RF Output Power (RF 
POWER)” on page 12 and “Setting the maximum RF 
output power (MAX RF POWER)” on page 14.

Digital low-cut filter

For details, see “Low-cut Filter Setting (LCF)” on 
page 13.

Power sleep mode

For details, see “Power Save Setting (POWER SAVE)” on 
page 13.

Summary of Contents for DWM-02N






















Reviews: