13
Using wireless remote control, this function can be
controlled from the receiver and other devices.
For details on wireless remote control function, see
“Using the Cross Remote” on page 8.
Low-cut Filter Setting
(LCF)
The frequency of the low-cut filter can be set.
OFF:
Turns off the low-cut filter.
20 30 40 50 60 70 80 90 100
120 140 160 180 200 220 (Hz):
Low-cut filter is set
according to the selected frequency.
Using wireless remote control, this function can be
controlled from the receiver and other devices.
For details on wireless remote control function, see
“Using the Cross Remote” on page 8.
Power Save Setting
(POWER SAVE)
To conserve power, this setting allows you to put all
microphone functions to sleep.
ACTIVE:
The microphone operates normally.
SLEEP:
The sleep function is on. During sleep, the
POWER indicator flashes at 2-second intervals.
To change back to normal operation
During sleep, press the SET, +, or – button.
You can also use the wireless remote control to change the
receiver back to normal operation.
For details on wireless remote control function, see
“Using the Cross Remote” on page 8.
If the microphone is turned off while power save setting is
set to “SLEEP”, the setting will change to “ACTIVE”
automatically.
Setting the Battery Type
(BATTERY
TYPE)
Set this item according to the type of batteries you use to
obtain accurate battery power status indication.
TYPE1:
The power status is indicated based on
characteristics of new LR6 (size AA) Sony Alkaline
batteries. Select this for LR6 (size AA) alkaline batteries.
TYPE2:
Select this for rechargeable nickel-metal-hydride
batteries.
TYPE3:
Select this for lithium batteries.
The characteristics of batteries change according to battery
type and environmental conditions. It is recommended that
you learn the characteristics of batteries you use before
using them.
Displaying the Accumulated Use
Time
(TIME)
You can display the accumulated battery use time as a
rough estimate of total microphone usage.
The factory setting is “00:00”.
To reset the accumulated time indication
1
Hold down the SET button until the time indication
flashes.
2
Press the – button so “00:00 RESET” appears, and
then press the SET button.
Using wireless remote control, this function can be
controlled from the receiver and other devices.
For details on wireless remote control function, see
“Using the Cross Remote” on page 8.
Setting the Encrypted Transmission
Function
(ENCRYPTION)
You can set the encrypted transmission function.
SECURE KEY:
Sets the secure key method.
PASSWORD:
Sets the password method.
OFF:
The encrypted transmission function is not used.
For details, see “Using the Encrypted Transmission
Function” on page 9.
Setting the audio codec mode
(CODEC MODE)
MODE1:
This audio codec mode is compatible with the
first generation DWX series.
Input
Attenuation
(dB)
Reference
input level
(dBu)
Maximum
input level
(dBu)
Headroom
(dB)
MIC
0
–52
–16
36
3
–49
–13
6
–46
–10
9
–43
–7
3 dB steps
3 dB steps
3 dB steps
45
–7
+2
48
–4
+5
Note
Note
Summary of Contents for DWM-02N
Page 21: ...Sony Corporation ...
