C O B A L T
™
W
I
R
E
D
MICROPHONES
General Product Description
Designed to yield outstanding performance in applications
requiring the miking of acoustic and electric instruments,
as well as vocal performances. Excellent for stage or studio,
the Co4’s versatility will make it a “must have” in any
microphone mix.
Microphone Use and Placement
Please note that miking techniques are a matter of personal
preference. These are merely guidelines to assist in the
placement of the microphone to gain optimal performance.
Usage Optimal
Placement
Electric Guitar
Place microphone approximately 1-2" from and at
and Bass
a 90° degree angle to the speaker cone.
Guitar Amplifier
To reduce boominess, move the microphone off
axis to the cone from 90° to 45°, or move mic
from center of cone to either edge.
Tom-Toms
On double headed Toms place mic over the top of
drum 1-3" and at a 45° angle to the drum surface
and 1-2" in from the drum edge. On single headed
Toms use above method or place mic inside Tom
from underneath at a 90° angle from the center of
head, 3-5", away.
Snare Drum
Place mic 1-3" above the heads, 1-2" in from the
rim. Aim each mic at the top heads angled down
about 45°. If the drum rings, tape deadening
material to the head or use damping rings.
For more “snare” sound place a 2nd mic
underneath aimed up at the bottom of head.
Cymbals
Place microphone one to two feet above the
top of cymbals.
High-Hat
Place 5 inches above outside edge at a
45° down angle.
Brass
6-24" away, and on axis with the bell of
the instrument.
Acoustic Guitar
Place mic 6-12" from where finger board
joins the body.
Cobalt
™
Co
4
Instrument Microphone
