Sony DWM-01, Operating Instructions Manual

Page: 17 / 39

17 Parts Identification
i
Display section
A
RF transmission indication
Indicates the current transmission status.
: Currently transmitting
—: Transmission stopped
B
RF (radio frequency) transmission
power indication
Indicates the current transmission power
setting. You can change the setting with the
RF transmission power setting function.
H: transmitting at 50 mW
M: transmitting at 10 mW
L: transmitting at 1 mW
C
Audio input level meter
Indicates the signal input level.
D
Reference level gauge
Indicates the reference input level. When
the attenuation is 0 dB, 94 dBSPL is
indicated.
E
Peak indicator
Warns of excessive input by lighting up
when the signal is 3 dB below the level at
which distortion begins.
F
POWER switch lock indicator
Indicates that the POWER switch is locked,
preventing the microphone from being
accidentally turned off or on.
For details, see “Locking the POWER Switch
(POWER SW LOCK)” on page 30.
G
Wireless remote control condition
indication
Indicates the signal transmission condition
of the wireless remote control function (4
levels).
: Good transmission
: Somewhat good transmission
: Somewhat poor transmission
: Poor transmission
: Unable to communicate with paired
receiver
When the wireless remote control function
is off, this indication does not appear.
H
Battery indication
Shows the battery condition.
For details, see “Battery indication” on page 18.
I
Menu display section
The status of 17 different functions are
displayed here. To select the function, press
the + or – button repeatedly.
For details, See “Setting Menus” on page 26.
j
POWER switch
Turns the microphone ON or OFF.
k
Battery compartment
Accommodates two LR6 (size AA) alkaline
batteries.
For details on how to insert the batteries, see
“Power Supply” on page 18.