Sony DWM-01, Operating Instructions Manual

Page: 16 / 39

16 Parts Identification
Parts
Identification
a
Wind screen
b
Grip
Contains operation buttons, display section,
and the battery holder.
Open the grip to make settings or install the
batteries.
For details on how to open the grip, see “Installing
the Batteries” on page 18.
When the grip is open, the metal part of the
grip obstructs the antenna for RF
transmission and wireless remote control
system. To transmit the signal or to use the
wireless remote control function with this
microphone, be sure to close the grip.
c
Identification ring
The ring can be replaced with the ones
supplied.
This is useful when multiple microphones
are used in the system.
For details on how to replace the identification ring,
see “Replacing the Identification Ring” on page 19.
d
Antenna cover
Holds the antenna for RF transmission and
wireless remote control function.
e
POWER indicator
Lights up green when the microphone is
turned on. When the battery is exhausted,
the indicator starts flashing.
f
USB connector (Micro USB)
Use this connector to connect an optional
USB keyboard to carry out menu functions
using key operations.
By connecting the digital wireless receiver
to this connector with the supplied USB
cable, you can exchange the encryption key
for encrypted transmission function.
g
+ or – button
Selects functions or values shown on the
display.
Holding down the – button while switching
on the microphone activates the pairing
operation for the wireless remote control
function.
h
SET button
Adjusts displayed function settings and
enters the value.
Holding down the SET button while
switching on the power turns the
microphone on without sending a signal.
Note
Inside the
grip
Front
Side
Bottom of
the antenna
cover