1-6
25
H
ook
up
s
z
Hint
If you connect an AV amplifier (receiver) that
conforms to the 96 kHz sampling frequency, use
connection .
* Manufactured under license from Dolby
Laboratories. “Dolby,” “Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
** Manufactured under license from Digital
Theater Systems, Inc. US Pat. No. 5,451,942,
5,956,674, 5,974,380, 5,978,762 and other
world-wide patents issued and pending. “DTS”
and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
Copyright 1996, 2000 Digital Theater Systems,
Inc. All rights reserved.
D
,
continued
26
Connecting to your TV
This connection will use your TV speakers for sound.
* The yellow plug is used for video signals (page
21).
z
Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
AUDIO OUT L/R 1/2 jacks to the TV’s audio input
jack.
A
SELECTABLE
INTERLACE
PROGRESSIVE
SCAN SELECT
COMPONENT VIDEO OUT
P
R
P
B
Y
5.1CH OUTPUT
FRONT
REAR
CENTER
WOOFER
L
R
1 2
COMMAND MODE
3
S VIDEO
OUT
2
1
VIDEO
OUT
2
1
AUDIO OUT
1
2
L
R
S-LINK
CONTROL S
IN
DIGITAL OUT
PCM/ DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
A
AUDIO OUT
1
2
L
R
TV
l
: Signal flow
CD/DVD player
(white)
(red)
Audio/video
cord (supplied)
to audio input
(yellow)
(white)
(red)
(yellow)
*
to AUDIO OUT L/R
1 or 2
27
H
ook
up
s
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
.
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
z
Hints
• In connection
, you can use the supplied
audio/video cord instead of using a separate stereo
audio cord.
• To realize better surround sound effects, make
sure that your listening position is in between
your speakers.
Note
Super Audio CD audio signals are not output from
the digital jack.
B
B-1
B-2
SELECTABLE
INTERLACE
PROGRESSIVE
SCAN SELECT
COMPONENT VIDEO OUT
P
R
P
B
Y
5.1CH OUTPUT
FRONT
REAR
CENTER
WOOFER
L
R
1 2
COMMAND MODE
3
S VIDEO
OUT
2
1
VIDEO
OUT
2
1
AUDIO OUT
1
2
L
R
S-LINK
CONTROL S
IN
DIGITAL OUT
PCM/ DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
B-2
B-1
AUDIO OUT
1
2
L
R
DIGITAL OUT
PCM/ DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Coaxial digital
cord (not supplied) Stereo audio cord
(not supplied)
to audio input
to coaxial or optical
digital input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
or
to AUDIO OUT L/R 1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
l
: Signal flow
B-1
,
continued
28
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
z
Hint
For correct speaker location, refer to the operating
instructions of the amplifier (receiver).
Notes
• When connecting 6 speakers, replace the
monaural rear speaker with a center speaker, 2
rear speakers, and a subwoofer.
• Super Audio CD audio signals are not output from
the digital jack.
C
C-1
C-2
SELECTABLE
INTERLACE
PROGRESSIVE
SCAN SELECT
COMPONENT VIDEO OUT
P
R
P
B
Y
5.1CH OUTPUT
FRONT
REAR
CENTER
WOOFER
L
R
1 2
COMMAND MODE
3
S VIDEO
OUT
2
1
VIDEO
OUT
2
1
AUDIO OUT
1
2
L
R
S-LINK
CONTROL S
IN
DIGITAL OUT
PCM/ DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
C-2
C-1
AUDIO OUT
1
2
L
R
DIGITAL OUT
PCM/ DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
l
: Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Center
Rear (mono)
Stereo
audio cord (not
supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(red)
(white)
to coaxial or optical digital
input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
[Speakers]
or
to audio input
(white)
(red)
to AUDIO OUT L/R 1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
