Sony DVP-NS92V, Operating Instructions Manual

Page: 70 / 96

70
Controlling Your TV or AV
Amplifier (Receiver) With
the Supplied Remote
By adjusting the remote signal, you can
control your TV with the supplied remote.
If you connect the player to an AV amplifier
(receiver), you can control the volume with
the supplied remote.
Notes
• Depending on the connected unit, you may not be
able to correctly control your TV or AV amplifier
(receiver) using some of the buttons below.
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
Controlling TVs with the remote
1
Slide the TV/DVD switch to TV.
2
While holding down [ / 1 , press the
number buttons to select the
manufacturer’s code for your TV (see
the table below).
3
Release
[
/
1
.
When the TV/DVD switch is set to TV, the
remote performs the following:
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
2 +/–
(TV/Video)
[/1
TV/DVD
switch
Number
buttons
[
/
1
Turns the TV on or off
2
(volume) +/– Adjusts the volume of the TV
t
(TV/Video) Switches the TV’s input
source between the TV and
other input sources
Number buttons
and
-
Selects the programme
position of the TV
Manufacturer Code number
Sony 01 (default)
Aiwa 01 (default)
Grundig 11
Hitachi 23, 24, 72
Loewe 06, 45
Nokia 15, 73
Panasonic 17, 49
Philips 06, 07, 08, 23, 45, 72
Saba 43, 75
Samsung 06, 22, 23, 71, 72
Sanyo 25
Sharp 29
Telefunken 43, 75
Thomson 43, 75
Toshiba 38
LG 06
JVC 33