Sony DSR-DU1, Operating Instructions Manual

Page: 8 / 28

Names and Functions of Parts
8
This turns the LCD monitor light on or off.
h
Ventilation outlet
This is the outlet from the cooling fan.
Note
Be careful not to obstruct the ventilation opening.
i
MENU button
Pressing this button displays the menu in the LCD
monitor (see page 22). Press once more to return to
the DSR-DU1 status display (see next item).
j
POWER switch
This powers the DSR-DU1 on or off.
k
WARNING indicator
This indicator lights or flashes when there is a
problem with the DSR-DU1 (see page 25).
l
STOP button
During playback from the DSR-DU1 hard disk,
pressing this button stops the playback.
m
.
(previous) button
During playback, pressing this makes a reverse
search at
×
5 speed.
When stopped, pressing this button once moves to
the previous recording start point. Holding down
the button for at least two seconds moves back 10
clips*.
*In this system, the term “clip” is used to refer to
the unit of recording from the start point to the end
point.
n
B
(playback) button
This plays back from any position on the DSR-DU1
hard disk.
o
>
(next) button
During playback, pressing this makes a forward
search at
×
5 speed.
When stopped, pressing this button once moves to
the next recording start point. Holding down the
button for at least two seconds moves forward 10
clips*.
*In this system, the term “clip” is used to refer to
the unit of recording from the start point to the end
point.
p
LCD monitor
This shows the DSR-DU1 status (see next item) or
a menu (see page 22).
q
Jog dial
This is used to operate the menu displayed on the
LCD monitor, and change TC/UB/clip settings.
Turn the dial to select an item, and press to confirm
(see page 23).
r
Remote controller
Connect to the REMOTE connector on the main
unit. This has a START/STOP button, CUE button,
and tally indicator, and the button functions are the
same as those on the main unit. The tally indicator
lights red only during recording.
s
i.LINK cable
This cable is supplied with the DSR-DU1, and has
a 4-pin connector at each end. Connect the L-
shaped end to the main unit.
LCD monitor display
When the LCD monitor is not displaying the menu, it
shows the DSR-DU1 status as follows.
Display
area Type Indication Meaning
A
Command PLAY Playback
P-PAUSE Playback paused
REC Recording
R-PAUSE Recording paused
FWD Search forward
REV Reverse search
STOP Stopped
>> Moving to next
recording start
point
<< Moving to previous
recording start
point
PC-REMOTE Using SBP2
protocol
B
Recording
mode Blank Normal
INT
Interval recording
Y A L P
R C T
K S I
: H H : M M : S S F F
i L
X X i m X n D
T T A B
K
I
A
D E
B
F
H
J
C
G