Menus
22
Menus
Most of the DSR-DU1 settings are carried out in
the menus.
Menu Organization and Content
Page 1
Page 2 (When MODE is set to STD or INT only)
Page 3 (When MODE is set to STD or INT only)
a) While deleting the last recorded clip, the cache recording function does
not operate. Therefore, after deleting the clip, only the signal input
through the i.LINK interface can be recorded.
Page 4 (When MODE is set to INT only)
Item
Setting and values
(factory default settings shown by an asterisk)
MODE
Sets the recording mode.
•
STD*: Standard mode
•
DUP: Mode in which operation is always
coupled to the tape operation, recording
the same video and timecode values.
The items to be forcibly changed are
displayed.
•
INT: Interval recording mode.
The items to be forcibly changed are
displayed.
PC REM
Select whether to enable or disable access by
the SBP2 protocol.
•
DIS*: Disable
•
ENA: Enable
Item
Setting and values
(factory default settings shown by an asterisk)
TCG
Set the timecode advancement mode.
•
FREE: Always advancing, in step with the
internal timecode generator.
•
REC*: Advancing during recording only,
in step with the internal timecode
generator.
•
EXT: Synchronized to the external
timecode generator.
When MODE is set to DUP, this is always
EXT.
TC PRESET
Switch to the screen for setting the timecode
preset value. Carry out the operation with the
jog dial.
UB PRESET
Switch to the screen for setting the user bit
preset value. Carry out the operation with the
jog dial.
FRAME
(Does not
appear when
SYSTEM is set
to 625.)
Set the drop-frame mode.
•
DF*: Drop-frame
•
NDF: Non-drop-frame
Item
Setting and values
(factory default settings shown by an asterisk)
DELETE
LAST
a)
Delete the most recently recorded clip.
A confirmation message appears.
When MODE is set to DUP, it is not possible
to delete the latest file alone.
PARAREC
(When MODE
is set to STD
only)
Switch coupled (parallel) recording with the
camcorder on or off.
•
OFF*
•
ON
When MODE is set to DUP, this is always ON.
When MODE is set to INT, forcibly set to
OFF.
CACHE
(When MODE
is set to STD
only)
Set the length of cache recording.
•
0s (0 second)
•
2s (2 seconds)
•
4s (4 seconds)
•
8s (8 seconds)
When MODE is set to DUP, the cache
recording function does not work.
When MODE is set to INT, forcibly set to 0s.
Item
Setting and values
(factory default settings shown by an asterisk)
INT TIM
Set the recording interval.
•
0.5m*: 30 seconds
•
1m: 1 minute
•
5m: 5 minutes
•
10m: 10 minutes
INT REC
Set the length of each recording.
•
0.5s* (0.5 seconds)
•
1s (1 seconds)
•
1.5s (1.5 seconds)
•
2s (2 seconds)
Summary of Contents for DSR-DU1
Page 28: ...Sony Corporation ...