Sony DSR-20MD, Service Manual

Page: 93 / 225

5-1
SECTION 5
ADJUSTMENTS
DSR-20MD/20MDP
5-1. MECHANICAL SECTION ADJUSTMENTS
5-1-1. INFORMATION
1-1. HOW TO SEARCH REFERENCE PAGES FOR REMOVAL
702
703 B
703 A
not
supplied
4
not
supplied
5
not supplied Ref. page No.
1 Page 5-40
2 Page 5-40
3 Page 5-38
4 Page 5-41
5 Page 5-41
Ref. No. Part No. Description Ref. Page No. Ref. No.
*
701 A-7092-644-A FL BLOCK ASSY (5-2) 708
702 A-7092-647-A SLOAT BLOCK ASSY, C (5-41) 709
703 3-967-604-01 SPRING (DB), TENSION (
A
:5-40/
B
:5-41) 710
704 3-967-655-01 DOOR, C (5-40)
705 3-967-613-01 SPRING (HS), TENSION COIL (5-41) 711
712
• To facilitate finding the required pages on how to removing and attaching parts, reference pages are listed in the remarks of the
exploded views (6-4 to 6-9 pages) in the 5-1. Mechanical Section Adjustment.
1-2. PHASE ADJUSTMENT MARK “ PH- ”
Numerous phase adjustments must be performed for removing and attaching parts (replacing parts) of the E mechanism. When remov-
ing and attaching parts, be sure to check the phase adjustment of corresponding parts. Parts that need phase adjustment are indicated
with
PH-
mark. When replacing parts indicated with
PH-
mark, check their positions and phases so that the parts are attached
smoothly in later.
Example Stopper washer (1.5)
PH-E M slider
Stopper washer (1.5)
PH-B M slider arm
#
#
Example
PH-B : Page 5-6
PH-B : Page 5-7
The reference pages of phase adjustment are appeared
on the top of the right in each page.
In case of the above figure, refer to B and E of “5-1-3. PHASE
ADJUSTMENTS”