Sony DSC-P31, Service Manual

Page: 123 / 175

5-18
DSC-P31/P31M
4. Flange Back Check
Mode CAMERA
Subject Siemens star
(50 cm from the front of the lens)
(Luminance: 200 to 400 lux)
Measurement Point Check operation on monitor TV
Measuring Instrument
Specified value Focused at the TELE end and
WIDE end
Checking method:
Order Page Address Data Procedure
1
Place the Siemens star 50 cm
from the front of the lens.
2
To open the IRIS , decrease
the luminous intensity to the
Siemens star up to a point
before noise appear on the
image.
3
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-13)
4 6 90 00
5 6 91 00
6 6 92 00
7 6 93 B0
8 6 01 79 Press PAUSE button.
9 6 07
Check the data
changes to “01”.
10
Check that the lens is
focused.
Processing after Completing Adjustment:
Order 2Page Address Data Procedure
1 6 01 00
2 6 93 00
3
Release the data setting
performed at step 3.
(Refer to page 5-13)
5. F No. Compensation
RadarW RadarW RadarW RadarW RadarW
Compensate the unevenness of the iris meter sensitivity.
Mode CAMERA
Subject Clear chart
(Standard picture frame with the
zoom lens at WIDE end)
Adjustment Page F
Adjustment Address 5E to 64
Note 1: Check that the data of page: 6, address: 02 is “00”.
If not, turn the power of unit OFF/ON.
Adjusting method:
Order Page Address Data Procedure
1
Perform “Data setting during
camera system adjustment”.
(Refer to page 5-13)
2
Perform “Picture Frame
setting”.
(Refer to page 5-14)
3 6 01 BB
Press PAUSE button.
(Note 2)
4 6 02
Check the data changes to
“01”.
Note 2: The adjustment data will be automatically input to page:
F, address: 5E to 64.
Processing after Completing Adjustment:
Order Page Address Data Procedure
1 6 01 00 Press PAUSE button.
2
Release the data setting
performed at step 1.
(Refer to page 5-13)