37
Installation
7
Attach the screws A and B in the remaining holes in the SDI-93
board, attaching it to the unit.
2
Remove the screws in all four corners of the TX-96 board.
Hole
I
TX-96 board
SDI-93
board
4
Replace the TX-96 board so it is connected to the SDI-93 board,
and fasten with screws in all four corners.
3
Lift up the TX-96 board, disconnect it from the SDI-93 board,
and move it to the side. Fasten the supplied screw A in hole
I
.
TX-96
board
Screw A
Summary of Contents for DSBK-1820
