33
Installation
2
Remove the outer BNC connector and the harness from the HD
SDI connector panel.
3
Replace the HD SDI connector panel (see following figure
1
), and
connect the harness removed in step
2
to the temporary joint
connector on the SDI-93 board (see following figure
2
).
1
2
Connector panel (AES/EBU Input)
Connector panel (SDI Input)
Connector panel (HD SDI)
SDI-93 board
Connector panel
(HD SDI)
Harness
Outer BNC connector
Summary of Contents for DSBK-1820
