Sony DS-HMD1, Operating Instructions Manual

Page: 14 / 88

14
-GB
3
Double-click [My Computer] and make sure
[Removable Disk] has appeared.
4
Double-click [Removable Disk] and drag-and-
drop the data you want to store to the drive.
About the ACCESS lamp
The ACCESS lamp indicates the operating status of the drive.
ACCESS lamp Status
Continuously on The drive is connected to the
computer and has been
correctly recognized.
Flashing quickly
(at intervals of about
0.1 seconds)
Data is being written to the
disc in the drive.
Flashing slowly
(at intervals of about
1.5 seconds)
The drive is in standby
mode for writing
1)
1) About “standby mode for writing”
In standby mode for writing, data can be written immediately to the disc right after
the previous writing operation.
When you try to write data to the disc while the ACCESS lamp is continuously on,
it will take a little time before writing actually begins.
Off The disc in the drive can be
removed.