Sony DNW-A25WS, Installation Manual

Page: 6 / 26

1-2
DNW-A25WS/A25WSP
DC IN
AC adaptor
AC-DN2A/DN2B
AC adaptor
AC-550
Lithium-ion battery
BP-L90A/L60A
Ni-cd battery
BP-90A
+
Battery adaptor
DC-L90
Ni-cd battery
BP-90A
+
Battery adaptor
DC-210
DC OUT
AC adaptor
AC-DN2A/DN2B
DNW-A25WS/A25WSP
Rear View
Battery terminal
(DC cable)
1-4. Power Supply
1-4. Power Supply
The unit works either on AC current (using the AC adaptor) or battery. When repairing or checking the
unit, however, AC-operation is recommended.
Power Voltage: DC 11 to 17 V
Power Consumption : 65 W
m
.
The AC adaptor AC-DN1 cannot be used to derive power.
.
The AC adaptor AC-DN2A/DN2B can supply power to two VTRs simultaneously. The AC-DN2 with
serial No.11001 or higher can supply, too. If the above adaptor is used, power on the VTRs and load
cassettes in turn allowing for an inrush current.
. While the unit is battery-operated, the remaining battery capacity is displayed on the sub menu indica-
tor. When the battery is nearly dead, the WARNING indicator on the side of the LCD monitor will
blink. For details, refer to the operation manual supplied with the unit.
Connection example (when operating two VTRs)