6(E)
RS-232C-2
SCSI
SET UP
⁄
AC IN
⁄
AC IN
BREAKER
TO GY-2120
RS-232C-1
TO TAPE STREAMER
ID
TERM POWER
SCSI
y
Rear Panel
Location and Function of Parts
1
RS-232C-2 connector
2
SCSI connectors
3
TERM POWER indicator
4
ID switch
5
TO TAPE STREAMER connector
6
TO GY-2120 connector
1
RS-232C-2 connector (D-sub 25-pin)
This is for servicing use only.
2
SCSI connectors (Through)
• WD model
(68-pin, SCSI Wide Differential)
Connect this to the host computer with a SCSI-3
compliant P-cable (Differential).
To terminate the connection, connect a terminator
(Differential).
• WS model
(68-pin, SCSI Wide Single-ended)
Connect this to the host computer with a SCSI-3
compliant P-cable (Single-ended).
To terminate the connection, connect a terminator
(Single-ended).
3
TERM (termination) POWER indicator
This lights when power is supplied to the TERM
POWER pin of the SCSI connector from at least one of
the devices connected to the SCSI bus.
If power is supplied from none of the devices
connected to the SCSI bus, this indicator goes off, and
the SCSI bus does not operate.
!¡
SET UP switches
!º
RS-232C-1 connector
9
AC IN connector
7
Breaker
8
REVISION label
