Other Features
51
To change the setting
Start over from step 1.
To check the setting / To use the
timer
1
Press CLOCK/TIMER SELECT.
2
Press
.
or
>
to select either “MD REC”
or “TAPE REC”, then press ENTER/YES.
To cancel the timer
Press CLOCK/TIMER SELECT and press
.
or
>
repeatedly until “TIMER OFF” appears,
then press ENTER/YES.
Tip
When you record from the radio, the station name
(see page 46, or frequency when the station is not
labelled), the start time and the stop time are
automatically recorded on the MD.
Notes
• The Smart Space and Level Synchro Recording
functions do not operate.
• You cannot activate Daily Timer and the recording
timer at the same time.
• Do not operate the system from the time the system
turns on until the recording starts (about 30 seconds
before the preset time).
• When you record on a brand new MD, the first 15
seconds are not recorded.
• If the system is on about 30 seconds before the
preset time, the timer-recording will not be
activated.
• The volume is reduced to minimum during
recording.
• When the timer is set, the Power Saving Mode does
not function.
• If you use another component (except for the
optional tape deck TC-TX373), you must set the
timer on both systems to the same time.
You cannot activate the component with this
system’s timer.
