Sony DDigital betacam VW-790WSP, Operation Manual, Page: 24 / 296

Chapter 2 Locations and Functions of Parts and Controls
2-8
2
4 AUDIO LEVEL CH-1/CH-2 (audio channel 1 and channel 2
recording level) controls
These controls adjust the audio level of channels 1 and 2 when you set
the AUDIO SELECT CH-1/CH-2 switches to MANUAL.
5
AUDIO SELECT CH-1/CH-2 (audio channel-1 and channel-2
select) switches
These switches set the audio level adjustment for channels 1 and 2 to
MANUAL or AUTO.
AUTO: Select this setting for automatic adjustment.
MANUAL: Select this setting for manual adjustment.
6 AUDIO IN (audio input) switches
These switches select the audio input signals for audio channels 1 and 2.
The input signal source is one of:
FRONT: The input signal source is the MIC IN connector.
REAR: The input signal source is the AUDIO IN CH-1/CH-2
connectors.
The audio input signals from the MIC IN connector are always recorded
on audio channels 3 and 4, respectively, whether or not they are recorded
on audio channels 1 and 2 in accordance with the setting of this switch.
With the CA-701 (not supplied) connected to the camcorder, you can
record separate sounds to audio channels 3 and 4.
For more information, refer to “maintenance manual.”
7 CUE IN (cue track input) switch
This switch selects the input signals for recording the cue track.
CH-1 : Channel 1 input signal
MIX : Mixed input signal of channels 1 and 2
CH-2 : Channel 2 input signal