manualshive.com logo in svg

Sony DDigital betacam VW-790WSP, Operation Manual, Page: 239 / 296

Share
Download
Sony DDigital betacam VW-790WSP Operation Manual Download Page 239

Chapter 5  Setting Up the Camcorder

5-35

5

Removing the camcorder from the tripod adaptor

Removing the camcorder from the tripod adaptor

Note

The tripod adaptor pin may remain in the engaged position even after the
camcorder is removed. If this happens, press the red button against the
lever a second time and move the lever as shown below until the pin
returns to the stowed position. If the pin remains in the engaged position,
you will not be able to mount the camcorder on the tripod adaptor.

If the pin remains in the engaged position

Lever

Red button

Press the red
button against
the lever and
move the lever
indicated by the
arrow.

Stowed position

Pin

Summary of Contents for DDigital betacam VW-790WSP









































































































































































































































































































Reviews:

No comments