manualshive.com logo in svg

Sony DDigital betacam VW-790WSP, Operation Manual, Page: 157 / 296

Share
Download
Sony DDigital betacam VW-790WSP Operation Manual Download Page 157

Chapter 4  Adjustments and Settings for Recording

4-79

4

If the settings of the GAIN selector values have been changed, the
black set must also be adjusted.

For more information, refer to “maintenance manual.”

6

Press the rotary encoder, so that the question mark disappears.

7

To end the menu operation, set the MENU ON/OFF/PAGE switch to
OFF.

The setup menu disappears from the viewfinder screen and the
displays indicating the current status of the camcorder appear along
the top and bottom of the viewfinder.

4-9-2 Selecting the Functions

Use the FUNCTION 2/2 page of the setup menu to select the camcorder
functions related to return video signal.

Selecting required functions

Follow the procedure below to select the required functions.

Selecting required functions

1,2,7

4,5,6

3

(Continued)

Summary of Contents for DDigital betacam VW-790WSP









































































































































































































































































































Reviews:

No comments