manualshive.com logo in svg

Sony DDigital betacam VW-790WSP, Operation Manual, Page: 168 / 296

Share
Download
Sony DDigital betacam VW-790WSP Operation Manual Download Page 168

Chapter 4  Adjustments and Settings for Recording

4-90

4

Notes

• The BOX CURSOR setting on the MARKER 2/3 page is cancelled in

the following cases.
— The BOX/4:3/14:9 LMT setting is 4:3 or 14:9.
— The 16:9/4:3 MODE setting is 4:3 with the VF ASPECT set to

16:9.

• The LEVEL 1 page can be individually set for both 16:9 and 4:3 mode.

To change the setting of another function, return to step 

3

.

5

To end the menu operation, set the MENU ON/OFF/PAGE switch to
OFF.

The setup menu disappears from the viewfinder screen and the
displays indicating the current status of the camcorder appear along
the top and bottom of the viewfinder screen.

Summary of Contents for DDigital betacam VW-790WSP









































































































































































































































































































Reviews:

No comments