Sony DCR-TRV30E, Operating Instructions Manual

Page: 207 / 252

207
Troubleshooting
Problemen oplossen
Types of trouble and their solutions
Others
Symptom Cause and/or Corrective Actions
• The tape has no cassette memory.
c
Use a tape with cassette memory. (p. 121)
• The cassette memory is full.
c Erase unnecessary titles. (p. 124)
• The tape is set to prevent accidental erasure.
c
Slide the write-protect tab so that red portion is not
visible. (p. 25)
• The tape has a blank portion in the recorded portion.
c Superimpose the title to the recorded position. (p. 122)
• The tape has no cassette memory.
c Use a tape with cassette memory. (p. 127)
• The cassette memory is full.
c
Erase unnecessary data. (p. 128)
• The tape is set to prevent accidental erasure.
c Slide the write-protect tab so that red portion is not
visible. (p. 25)
• The input selector on the VCR is not set correctly.
c Check the connection and set the input selector on the
VCR again. (p. 89, 90)
• The camcorder is connected to DV equipment of other
than Sony.
c Set it to IR. (p. 95)
• Setting programme on a blank portion of the tape is
attempted.
c Set the program again on a recorded portion. (p. 103)
• The camcorder and the VCR are not synchronised.
c Adjust the synchronicity. (p. 101)
• COMMANDER is set to OFF in the menu settings.
c Set it to ON. (p. 136)
• Something is blocking the infrared rays.
c
Remove the obstacle.
• The batteries are inserted in the battery holder with the + –
polarities incorrectly matching the + – marks.
c Insert the batteries with the correct polarity. (p. 246)
• The batteries are dead.
c
Insert new ones. (p. 246)
• Display is set to V-OUT/LCD in the menu settings.
c
Set it to LCD. (p. 136)
(continued on the following page)
The title is not recorded.
The cassette label is not recorded.
Digital program editing does not
function.
The Remote Commander supplied
with your camcorder does not work.
The picture from a TV or VCR does
not appear even when your
camcorder is connected to output on
the TV or VCR.