78
To change the insert end point
Press ZERO SET MEMORY again after step 5 to erase the ZERO SET MEMORY
indicator and begin from step 3.
Note
The picture and sound recorded on the section between the insert start and end points
will be erased when you insert the new scene.
When the inserted picture is played back
The picture may be distorted at the end of the inserted section. This is not a
malfunction.
To insert a scene without setting the insert end point
Skip step 3 and 4. Press
x
when you want to stop inserting.
Inserting a scene from a VCR – Insert Editing
(
1
)
Set the POWER switch to VCR.
(
2
)
On the VCR, locate just before the insert start point
[
a
]
, then press
X
to set the
VCR to the playback pause mode.
(
3
)
On your camcorder, locate the insert end point
[
c
]
by pressing
m
or
M
.
Then press
X
to set it to the playback pause mode.
(
4
)
Press ZERO SET MEMORY on the Remote Commander. The ZERO SET
MEMORY indicator flashes and the end point of the insert is stored in
memory.
(
5
)
On your camcorder, locate the insert start point
[
b
]
by pressing
m
, then press
z
REC and the button on its right simultaneously to set your camcorder to the
recording pause mode.
(
6
)
First press
X
on the VCR, and after a few seconds press
X
on your camcorder
to start inserting the new scene.
Inserting automatically stops near the zero point on the counter. Your
camcorder automatically stops. The end point
[
c
]
of the insert stored in
memory is canceled.
4
0:00:00
ZERO SET
MEMORY
ZERO SET
MEMORY
5
REC
Summary of Contents for DCR-TRV130 - Digital8 Camcorder
Page 111: ......
Page 112: ...Sony Corporation Printed in Japan 3 0 6 5 6 5 1 1 1 ...
